HEIDELBERG’S SPEEDMASTER XL RECEIVES INTERTECH AWARD

1243

Heidelberg's Speedmaster XL 145/162 has received a 2013 InterTech Technology Award. The judges were particularly impressed with the double gripper technology and motorised paper stretch compensation (remote fan-out control), along with the associated potential for cutting costs in terms of paper consumption and reduced makeready times. 

InterTech™ Technology Awards honour the development of technologies predicted to have a major impact on the graphic arts and related industries. More than 80% of technologies that receive an award experience continued commercial success in the marketplace. The Speedmaster XL has a double gripper delivery enables flexible job pooling. When printing mixed forms, the larger the paper format, the greater the flexibility in arranging the individual repeats. In the past, large-format perfectors had two limitations to contend with – smearing during sheet travel and machine-related restrictions in the arrangement of the mixed forms, since corridors for the sheet brakes prevented efficient job pooling and reduced the printable area by up to six percent. 

Both limitations are now history thanks to the double gripper technology that Heidelberg showcased at drupa 2012. Since the sheet in the delivery is guided by grippers at both the front and rear edges, the sheet guide plate has been eliminated completely and, with it, all the risks of ink buildup and associated scratches. Use of a special brake gripper bar also dispenses with the brake corridors that previously hindered job pooling. Jobs can now be nested over the entire surface of the sheet. The elimination of brake corridors results in significant cost reduction, not only for web-to-print shops but also for commercial printing. Paper savings of around 5 cm (1.97 in) across the width of the sheet cut paper costs considerably.

The press has comprises of a motorised paper stretch compensation ensures precise register accuracy. This technology enables a register error caused by paper distortion at the rear edge of the sheet to be compensated fully automatically from the Prinect Press Center control station. This dispenses with the time-consuming process of manually adjusting the impression cylinder circumferentially or laterally by means of the clamping bar segments. 

This high register accuracy is a crucial advantage in the production of mixed forms by web-to-print suppliers in particular, as the printer – unlike in conventional commercial printing – has only limited influence over the makeup of the printing form. The mixed forms can easily accommodate up to 100 customer jobs, each of which must be of perfect quality, even if, for example, there are negative 8-point fonts at the rear edge of the sheet in 7B format. Whats more, makeready is around ten minutes faster, depending on the machine configuration. Used in combination and depending on the machine and job structure, both functions collectively can achieve annual cost savings of several hundred thousand euros.

Previous articleKOMORI FUNDS ECO ZONE
Next articleESKO ANNOUNCES FLEXO IMAGING TOUR